Table of Contents
Advertisement
Set an IPv4 address, change the protocol from DHCP to static, and set a new
e.
label to indicate that it is a management interface. Enter cd ../.. to return to
the correct context for the next step.
hostname:maintenance system setup net interfaces igb0> set v4addrs=192.0.2.11/24
hostname:maintenance system setup net interfaces igb0> set v4dhcp=false
hostname:maintenance system setup net interfaces igb0(uncommitted)> set
label=management-controller
hostname:maintenance system setup net interfaces igb0 (uncommitted)> commit
hostname:maintenance system setup net interfaces igb0> cd ../..
3.
Configure the Domain Name Service (DNS).
For detailed information, see
Administration Guide, Release
Configure DNS. Configure the Domain Name Service.
Subcommands that are valid in this context:
help [topic]
show
commit
abort
done
get [prop]
class = ip
label = Untitled Interface
enable = true
admin = true
links = igb0
v4addrs =
v4dhcp = true
v6addrs =
v6dhcp = false
v4addrs = 192.168.1.101/24 (uncommitted)
v4dhcp = false (uncommitted)
label = management-controller (uncommitted)
"DNS Configuration" in Oracle ZFS Storage Appliance
OS8.8.x.
=> Get context-sensitive help. If [topic] is specified,
it must be one of "builtins", "commands", "general",
"help", "script" or "properties".
=> Show information pertinent to the current context
=> Commit current state, including any changes
=> Abort this task (potentially resulting in a
misconfigured system)
=> Finish operating on "dns"
=> Get value for property [prop]. ("help properties"
for valid properties.) If [prop] is not specified,
Performing Initial Configuration (CLI)
Configuring the Appliance for the First Time
259
Advertisement
Table of Contents
