Guidelines For Entering Numbers, Letters, And Symbols; Correcting Mistakes - Canon FAX-B840 User Manual

Guidelines for entering numbers, letters, and
symbols
After 60 seconds of no operation panel input, the fax returns to standby mode and any unregistered changes are lost.
Entering letters and numbers
1 Press to switch mode.
2 Press the numeric button that contains the letter you want.
Press repeatedly until the letter you want appears.
3 Continue entering other letters using the numeric buttons.
• If the next letter you want to enter is under the same numeric button you pressed in step 2, press [
right. Then press that same numeric button repeatedly until the letter you want appears.
• To enter a space, press [Space].
Entering symbols
1 Press [#] repeatedly until the symbol you want appears.
2 If you want to enter another symbol, press [
repeatedly until the symbol you want appears.

Correcting mistakes

You can clear an entire entry by pressing [Clear]. Alternatively, follow the procedure below to correct individual
letters:
1 Use [ ] or [
2 Use the numeric buttons to enter the correct letter over the incorrect
letter.
3 When you have finished making corrections, press [Start/Copy] to register your new entry.
16
] to move the cursor under the incorrect letter.
] to move the cursor to the right, then press [#]
_ :A
C :A
] to move the cursor to the
# :1
CANEN :A
CANON :A