Physical Properties - Nikon ECLIPSE Ti2-U Instruction Manual

8.3

Physical Properties

Model
Electrical shock
protection class
Environmental conditions
External dimensions and
mass
Safety standards
Configuration of microscope:
• Ti2-U
• TI2-D-PD
• TI2-D-LHLED
• TI2-C-DICP
• TC-C-TC
• TI2-T-BC
• TI2-N-ND
• TI2-F-FLT-I
• TI2-LA-BF
• TI2-LA-FL-2
• TI2-LA-SU
ECLIPSE Ti2-U
Class I
Class I (AC adapter)
Operation:
Storage and Transport:
Altitude:
Pollution:
Overvoltage category:
Indoor use only
Ti2-U microscope system
(Device combinations: Ti2-U, TI2-D-PD, TI2-D-LHLED, TI2-C-TC, TI2-T-BC,
TC-T-ER, TC-S-SR, TI2-N-ND-I, TI2-F-FLT-I, TI2-LA-BF, TI2-LA-FL-2)
External dimensions:
Mass (reference):
Ti2-U microscope main body
External dimensions:
Mass (reference):
• CE Marking
• IVD Directive
This equipment complies with the emission and immunity
requirements of IEC/EN 61326-2-6.
• Low Voltage Directive
• EMC Directive
• C-UL-US Listed
• FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inter-
ference in which case the user will be required to correct the interference at the
user's expense.
• CAN ICES-003(A) / NMB-003(A)
• Australian EMI (AS/NZS CISPR11)
183
Temperature: 0 to 40°C
Humidity: 60% RH max. (at +40°C, no condensation)
Temperature: -20 to +60°C
Humidity: 90% RH max. (no condensation)
2,000 m max.
Degree 2
Category II
390 (W) x 668 (H) x 626 (D) mm (excluding protruding
parts)
Approximately 37.6 kg
240 (W) x 378 (H) x 527.5 (D) mm (excluding
protruding parts)
Approximately 20 kg
Chapter 8 Specifications