Physical Properties - Nikon SMZ800N Instruction Manual

3

Physical Properties

 Stereo microscopes SMZ800N/SMZ1270/SMZ1270i
Operating conditions
Transport/
storage conditions
External dimensions
(W x H x L) and
mass (reference)
Safety Standards
 AC Adapter
Model name
Operating environment
Storage environment
External dimensions
Mass (reference)
Safety standards
Chapter 8
Temperature: 0°C to +40°C
Humidity: 60% RH max. at 40°C (no condensation)
Altitude: 2,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class (AC Adapter): Class I
Indoor use only
Temperature: -20°C to +60°C
Humidity: 90% RH max. (no condensation)
Dimensions and mass vary depending on the composition described in Chapter 1, "Components."
SMZ800N Zooming Body system: 292 mm x 376 mm x 387 mm, approx. 5.5 kg
SMZ1270 Zooming Body system: 300 mm x 402 mm x 420 mm, approx. 6.5 kg
 CE Marking
 IVD Directive
This equipment complies with the emission and immunity requirements of
IEC/EN 61326-2-6.
 Low Voltage Directive
 EMC Directive
 C-UL-US Listed
 FCC Part 15 Subpart B Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
 CAN ICES-003(A) / NMB-003(A)
 Australian EMI (AS/NZS CISPR11)
3-AC AC Adapter(Model name by the
manufacturer: FSP040-RHAN2)
Temperature: 0°C to +40°C
Humidity: 10 to 90% RH (no condensation)
Altitude: 5,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class: Class I
Indoor use only
Temperature: -20°C to +75°C
Humidity: 5 to 95% RH (no condensation)
110 (L) x 50 (W) x 32 (H) mm
Approx. 210 g (without the power cord)
CE marking, GS mark, C-UL-US Listed,
PSE mark
Specifications
C-AC AC Adapter (Model name by the manufacturer:
PW-120A2-1Y240G)
Temperature: 0°C to +40°C
Humidity: 10 to 90% RH (no condensation)
Altitude: 5,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Electrical shock protection class: Class I
Indoor use only
Temperature: -20°C to +85°C
Humidity:
170 (L) x 64.8 (W) x 38.5 (H) mm
Approx. 650 g (without the power cord)
CE marking, GS mark, C-UL-US Listed,
PSE mark
96
10 to 90% RH (no condensation)