Nikon ECLIPSE Ti2-U Instruction Manual page 60

Chapter 3 Usage of Components
Using a motorized dia-illumination shutter
When using a precentered lamphouse, an NI-SH-E
motorized shutter can be attached to the
dia-illumination section. The motorized shutter can
be opened and closed with the NI-SH-CON controller
for motorized shutter.
 Operation:
Motorized shutter
controller
Control the SHUTTER 1
switch/SHUTTER 2
switch.
 Display:
The open and closed state of the motorized
shutter is indicated by the CLOSE indicator on the
front panel of the motorized shutter controller.
When the CLOSE indicator is lit, the shutter is
closed, and when the CLOSE indicator is unlit, the
shutter is open.
Operating the motorized shutter controller
The motorized shutter controller is equipped with two operation switches (SHUTTER 1 and SHUTTER 2),
which enable two motorized shutters to be controlled by a single controller.
■ Operation:
Opening and closing the shutter
SHUTTER 1 switch
SHUTTER 2 switch
Press the switch.
■ Display:
The open and closed state of the motorized
shutter is indicated by the CLOSE indicator on the
front panel.
SHUTTER 1 - CLOSE
SHUTTER 2 - CLOSE
indicator
Lit
Unlit
Blinking
For details on how to use the motorized shutter controller, see the instruction manual for the motorized
shutter controller.
Motorized shutter
The motorized shutter
opens or closes
Motorized shutter
The shutter opens or
closes each time the
switch is pressed.
Motorized shutter
Shutter closed
Shutter open
Error
Motorized shutter
F.
S.
Precentered lamphouse and motorized shutter
Motorized shutter controller
40
Precentered
lamphouse
POWER
switch
SHUTTER 1 and 2 switches,
CLOSE indicators