Performance Properties - Nikon ECLIPSE Ti2-U Instruction Manual

8.2

Performance Properties

Ti2-U microscope main body
Model
Optical system
Focusing unit
Pillar tilting section
AC adapter
Model
Manufacturer
Input rating
Output rating
Power cord
* For details, see the instruction manual supplied with the AC adapter.
ECLIPSE Ti2-U
Infinity-corrected CFI60 optical system
Observation optical system: Inverted observation; field number: 22
Device magnification:
Objective:
Output port
Optical path changeover: Four-position, manual changeover system
Objective elevation system:
Drive method:
Focus mechanism:
Refocusing mechanism:
Backward tilting up to 25 degrees is enabled; the clamp mechanism is provided.
3-AC (Model name by the manufacturer: FSP040-RHAN2)
4-AC (Model name by the manufacturer: FSP040-RHAN3)
FSP Group Inc.
100-240 VAC±10%, 1.5 A, 50-60 Hz
12 VDC, 3.33 A max.
When used in a 100-120 VAC region, outside Japan:
When used in a 220-240 VAC region:
When used in Japan:
179
1.0x/1.5x manual switching system (effective for all
ports)
Changeable to 1.0x / 2.0x by using an optional lens.
CFI60
Observation port, left side port, right side port
Manual
Stroke approximately 10 mm (approximately 8 mm
(upward), approximately 2 mm (downward))
Manual; the escape position is 0.5 mm above the lower
limit position.
UL listed detachable power cord set, 3-conductor
grounding
(3-conductor grounding Type SVT, NO.18 AWG, 3 m
long maximum, rated at 125 VAC minimum)
EU/EN listed detachable power cord set, 3-conductor
grounding
(3 conductor grounding Type H05VV-F 1 mm
maximum, rated at 250 VAC minimum)
PSE-approved detachable power cord set, 3-conductor
grounding
(3-conductor grounding Type VCTF 3 x 0.75 mm
long maximum, rated at 125 VAC minimum)
Chapter 8 Specifications
2 , 3m long
2
, 3 m