Moving A Sample On The Stage - Nikon ECLIPSE Ti2-U Instruction Manual

Chapter 3 Usage of Components
3.8.3

Moving a Sample on the Stage

Using a manual stage
The observation part of the specimen can be moved
in the X-axis and Y-axis directions using the stage
handles.
 Operation:
Stage handle
Turn the upper handle.
Turn the lower handle.
The stage can be fixed even when it is rotated 180
degrees. This allows setting the handle position
either on the right or left of the microscope.
The length of the stage handle can be selected
from long, middle and short at the time of purchase.
Movement stroke of the manual stage
• The movement stroke of the manual stage is 114 x 73 mm.
• The movement stroke can be restricted to either 75 x 50 mm or 18 x 18 mm using the supplied limit
screw.
For details on the procedure for setting the stroke, see "Chapter 7 Assembly of the Devices."
Rack protection plate for the manual stage
A protection plate for protecting the rack of the stage is
located on the top of the stage handle.
Because the protection plate protrudes from the stage,
take due care not to bump your hands or other objects
against the plate.
Using a gliding stage
By moving the movable part on the upper surface of
the stage, a specimen can be moved to the
front/back and right/left.
 Operation:
Movable part
Move it by hand.
Movement stroke of the gliding stage
The movement stroke of the gliding stage is 20 mm diameter.
Gliding stage maintenance
If the gliding stage is used beyond its warranty period, the power required to operate it might change. In
that case, it is possible to restore to the original status by maintenance work (at a fee). For details, contact
your local Nikon representative.
Moving direction of the
manual stage
The stage moves in the
Y-axis direction.
The stage moves in the
X-axis direction.
Sample
The sample moves in a
required direction.
Y direction
X direction
Moving the manual stage
Moving the gliding stage
60
Y direction
X direction
Rack
protection
Movable part