Table of Contents
Advertisement
Advanced Setup
In this section, you can configure network interfaces, security, quality of service settings, and many other settings for your gateway
and network.
Layer2 Interface
In this section, you can configure interfaces for ATM, PTM and Ethernet interfaces. Generally you can accept the settings configured
by default. If your network is highly customized, you may need to modify some of the settings, such as
Username
and Password.
ATM Interface
On this page, you can configure Asynchronous Transfer Mode / Permanent Virtual Conduit (ATM/PVC) settings for your gateway. You
can customize latency options, link type, encapsulation mode and more.
Note: Devices (routers) on both ends of the connection must support ATM / PVC.
1. In the left navigation bar, click
Advanced Setup
>
Layer2 Interface
>
ATM Interface
and then click Add. The following page
appears.
SmartRG Inc., an ADTRAN company. All Rights Reserved. © 2019
24
Advertisement
Table of Contents
