Initial Configuration - ADTRAN Quintum Tenor AS Installation Manual

Initial Configuration

Installing Tenor Configuration Manager
To begin configuration of the Quintum gateway, you must first install the Tenor Configuration Manager.
You can either get it from the CD included with the gateway or at the Quintum support website
(http://www.quintum.com/support).
After you have installed and run the Tenor Configuration Manager, the following screen appears.
Adding the Gateway
If your PC is running on the same subnet as the gateway, the gateway can be added automatically. If your
PC is running on a different subnet than the gateway, the gateway must be manually added.
To add the gateway automatically
1. Select Discover to automatically detect the gateway.
2. When the wizard finds the gateway, select Connect.
4