Firmware Version 4.7 Sp10 - Siemens SINAMICS G120D Operating Instructions Manual

Appendix
A.1 New and extended functions
A.1.2

Firmware version 4.7 SP10

Table A-2 New functions and function changes in firmware 4.7 SP10
Function
1 New parameter r7844 [1] for displaying the firmware version in plain text.
"04070901" is equivalent to firmware version V4.7 SP9 HF1, for example
2 Modbus RTU:
• The factory setting of parameter p2040 was increased to provide more
robust converter operation. Monitoring time for data failure at the Mod‐
bus interface: p2040 = 10 s
• r2057 indicates how the address switch on the converter is set
3 BACnet MS/TP:
• New factory setting for more robust converter operation:
– Baud rate p2020 = 38.4 kBd
– Monitoring time for data failure at the BACnet interface was in‐
creased: p2040 = 10 s
– Factory setting for the maximum number of info frames p2025 [1] = 5
– Factory setting for the maximum number of master addresses p2025
[3] = 32
• r2057 indicates how the address switch on the converter is set
4 Further technological unit kg/cm² for unit switchover
5 Further technological unit kg/cm² for additional technology controllers
344
✓ ✓
✓ ✓
- -
✓ ✓
- -
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
SINAMICS
G120 G120D
✓ ✓ ✓ ✓ ✓ ✓
✓ ✓ ✓ ✓ - -
✓ - - - - -
✓ ✓ ✓ ✓ ✓ ✓
✓ - - - - -
✓
-
-
✓
-