Motorized Potentiometer As Setpoint Source - Siemens SINAMICS G120D Operating Instructions Manual
Distributed inverter cu240d-2 control unit with encoder evaluation
Hide thumbs
Also See for SINAMICS G120D:
- List manual (910 pages) ,
- Operating instructions manual (398 pages) ,
- Original instructions manual (382 pages)
Table of Contents
Advertisement
8.13.4
Motorized potentiometer as setpoint source
Function description
The "Motorized potentiometer" function emulates an electromechanical potentiometer. The
output value of the motorized potentiometer can be set with the "higher" and "lower" control
signals.
Figure 8-30
Figure 8-31
Example
Setting with the motorized potentiometer as setpoint source:
Parameter
p1070 = 1050
Converter with the control units CU240D-2
Operating Instructions, 10/2020, FW V4.7 SP13, A5E34262100B AH
Motorized potentiometer as setpoint source
Function chart of the motorized potentiometer
Description
Interconnects the main setpoint with the motorized potentiometer output.
Advanced commissioning
8.13 Setpoints
197
Advertisement
Table of Contents
