Table of Contents
Advertisement
Ingeteam
11. DC connection
This chapter explains the requirements and process for wiring the DC cabling to the unit.
Read carefully before starting the connection process.
11.1. Safety instructions for the DC connection
Consult section "3. Safety" and the following safety instructions before working in the unit.
Ingeteam accepts no liability for any damages caused by incorrect connection.
Use the Personal Protective Equipment specified in the section "3.2. Personal Protective Equipment
(PPE)".
11.2. Wiring requirements for connecting DC connection
The wiring gauge for the DC connection is specified in the following table:
Recommended gauge for DC cables
11.3. DC connection process
1.
Remove the caps from the connectors.
2.
Insert the connectors respecting the polarities indicated on the lower connections plate of the unit.
3.
Ensure the connections are firm. If you wish to remove the aerial connectors, use the specific tool to do
so.
30
1Play
4 mm
2
ABF2011IQE01_A - Installation and usage manual
DC connection
Advertisement
Table of Contents
