Reprocessing Overview Primus 1058 Life - KaVo Primus 1058 Life Care Instructions

2 Setup methods according to DIN EN ISO 17664 | 2.2 General instructions for the reprocessing of KaVo treatment
Manual drying
Automatic drying
Servicing
Control and functional test
Packaging
Sterilisation
Storage
Reprocessing items/medical
devices
Surfaces
Unit
Cushion
Gripping sleeve, white
Gripping sleeve, grey
Light
Dentist element
Handpiece sleeve 3F and MF
handpieces
Cannula for 3F and MF hand-
pieces
Holder pad/anti-slip mat
Handpiece holder
Swing-arm S-table
Assistant element
▶ Supply dry, clean and uncontaminated compressed air according
to ISO 7494-2 only.
▶ Blow off the outside and inside with compressed air until water
drops are no longer visible.
Usually, automatic drying is part of the cleaning/disinfection cycle of
the washer disinfector and should not be carried out above 95 °C.
▶ Discard damaged products.
▶ Perform a visual inspection to check for damage and wear and
tear.
▶ Test products for function regularly.
▶ Use standardised packaging material. Sealing should not be un-
der tension.
▶ Use sterile goods packaging in order to ensure sterility.
All sterilisable products are temperature-resistant up to max. 138
°C.
Select a suitable procedure (depending on the available autoclave)
from the following sterilisation processes:
▪ Autoclave with three times pre-vacuum:
- at least 3 minutes at 134 °C -1 °C / +4 °C (273 °F -1.6 °F /
+7.4 °F)
▪ Autoclave using the gravity method:
- at least 10 minutes at 134 °C -1 °C / +4 °C (273 °F -1.6 °F /
+7.4 °F)
▶ Use according to the manufacturer's Instructions for Use.
▶ Reprocessed products should be stored protected from dust with
minimum exposure to germs in a dry, dark and cool place.
▶ Comply with the expiry date of the sterilised items.

2.2.1 Reprocessing Overview Primus 1058 Life

Cleaning
manual
Disinfection
automatic manual
7 / 44
Care instructions Primus 1058 Life
Sterilisa-
tion
automatic automatic
units