KaVo Primus 1058 Life Care Instructions page 30

Care instructions Primus 1058 Life
2 Setup methods according to DIN EN ISO 17664 | 2.8 Automatic hygiene functions of the water conducting sys-
Step Description
4.0 Dwell time (acoustic signal, switch off is possible)
Duration: 30 minutes
3.0 Rinsing of the tumbler
Duration: 40 seconds
2.0 Rinsing of the handpieces
Duration: 30 seconds
1.0 Rinsing of the triple-function and multifunctional handpiece
Duration: 30 seconds
0.1 Waiting position for setting down the handpieces
Intensive germ reduction is completed when "01 intensive germ reduction
completed" appears on the display.
▶ Put all handpieces in holders and take off the germ reduction attachment.
Interrupt intensive germ reduction during the dwell
time
So that no one will have to remain with the device throughout the entire intens-
ive germ reduction process, intensive germ reduction can be interrupted in pro-
gram step 4 (e.g. on the last workday before the weekend). Program step 4 is
the dwell time, in which the microorganisms are killed by an increased OXY-
GENAL 6 concentration.
Requirement
intensive germ reduction is in program step 4.
Requirement
You hear a beep for 4 seconds.
▶ Turn the device off.
When the device is switched on after 30 minutes of dwell time, the remaining
program steps run immediately and automatically.
If the device is turned on before the 30 minute period is elapsed, the dwell
times finishes first before the remaining steps of the intensive germ reduction
program run.
Skip exposure phase
This function is required when the treatment unit needs to be used (for ex-
ample in an emergency, at hospitals, etc.) even though the germ reduction pro-
cedure has already started.
See also:
2 2.8.1.2 Procedure of the rinsing program, Page 27
Intensive germ reduction is in step 4:
▶ Press and hold down the "Intensive germ reduction" button and the "Hydro-
colloid" button simultaneously.
30 / 44