Sms Control Commands - NetModule NB3000-Line-Hd User Manual

The following commands are supported:
Command
status
connect
disconnect
reboot
output 1 on
output 1 off
output 2 on
output 2 off
A response to the status command typically looks like:
System: NB2700 hostname (00:11:22:AA:BB:CC)
WAN1: WWAN1 is up (10.0.0.1, Mobile1, UMTS, -83 dBm, LAI 12345)
GPS: lat 47.377894, lon 8.540055, alt 282.200
OVPN: client on tun0 is up (10.0.8.4)
DIO: IN1=off, IN2=off, OUT1=on, OUT2=off
NB3000-Line-Hd User Manual 4.2
Action
Will reply a message to the sender including a short system
overview
Will enable the rst WAN link con gured on the system
Will disable the rst WAN link con gured on the system
Initiates a reboot of the system
Turns on the rst digital output port
Turns off the rst digital output port
Turns on the second digital output port
Turns off the second digital output port
Table 5.90.: SMS Control Commands
123