Getting Con G Parameters; Setting Con G Parameters; Checking Con G Completed; Getting Status Information - NetModule NB3000-Line-Hd User Manual

exit

6.3. Getting Con g Parameters

The get command can be used to get con guration values.
> get h
Usage :
get [ hsvfc ] <parameter > [ < parameter > . . ]
Options :
s generate sourceable output
v validate config parameter
f get factory default rather than current value
c show configuration sections

6.4. Setting Con g Parameters

The set command can be used to set con guration values.
> set h
Usage :
set [ hv ] <parameter >=<value > [ < parameter >=<value > . . ]
Options :
v validate config parameter

6.5. Checking Con g Completed

The done command can be used to check if all modify scripts have completed after a con g
change.
> done h
Usage :
done [ h ]

6.6. Getting Status Information

The status command can be used to get various status information of the system.
> status h
Usage :
status [ hs ] <section >
NB3000-Line-Hd User Manual 4.2
Exit
180