WWAN Interfaces
This page can be used to manage your WWAN interfaces. The resulting link will pop up
automatically as WAN link once an interface has been added. Please refer to chapter
for how to manage them.
The Mobile LED will be blinking during the connection establishment process and goes on
as soon as the connection is up. Refer to section
troubleshooting the problem in case the connection did not come up.
The following mobile settings are required:
Parameter
Modem
SIM
Service type
Please note that these settings supersede the general SIM based settings as soon as the link
is being dialed.
NB3000-Line-Hd User Manual 4.2
5.8.7
Figure 5.11.: WWAN Interfaces
WWAN Mobile Parameters
The modem to be used for this WWAN interface
The SIM card to be used for this WWAN interface
The required service type
55
or consult the system log les for
5.3.1
Need help?
Do you have a question about the NB3000-Line-Hd and is the answer not in the manual?
Questions and answers