Parameter
LED
Bootloader
The following bootloader parameters can be set:
Parameter
Password
Time & Region
This page can be used for setting the system time and con guring the time zone. You may
further enable daylight saving changes for your speci c time zone. NetModule routers can
synchronize their system time by using one or more servers by the help of the Network Time
Protocol (NTP) or via GNSS. If enabled, the time synchronization is usually triggered after a
WAN link has come up but before starting any VPN connections. Further time synchroniza-
tion cycles are scheduled in background.
NB3000-Line-Hd User Manual 4.2
LED Settings
You can customize the behavior of all status LEDs on the front
panel of your device. They are usually divided into two banks
(top/bottom). You may con gure toggle mode, so that the
LEDs periodically cycle between two separated con gured LED
schemes.
Bootloader Settings
The password used to unlock the bootloader. If empty, the
admin password will be used.
154
Need help?
Do you have a question about the NB3000-Line-Hd and is the answer not in the manual?
Questions and answers