Software Bridges - NetModule NB3000-Line-Hd User Manual

5.3.5. Software Bridges

Software bridges can be used to bridge layer-2 devices like OpenVPN TAP, GRE or WLAN
interfaces without the need for a physical LAN interface.
Bridge Settings
This page can be used to enable/disable software bridges.
It can be con gured as follows:
Parameter
Administrative status
IP Address
Netmask
MTU
NB3000-Line-Hd User Manual 4.2
Bridge Settings
Enables or disables the bridge interface. If you need an inter-
face to the local system you need to de ne an IP address for
the local device.
IP address of the local interface (available only if "Enabled with
local interface" was selected
Netmask of the local interface (available only if "Enabled with
local interface" was selected
Optional MTU size for the local interface (available only if "En-
abled with local interface" was selected
66