NetModule NB3000-Line-Hd User Manual page 224

Event
opcua-write.are
ping-supervision.are
read-con g.are
remote-mail.are
scan-mobile.are
scan-wlan.are
send-mail.are
send-sms.are
send-techsupport.are
serial-read.are
serial-readwrite.are
serial-tcp-broadcast.are
serial-tcsetattr.are
serial-udp-server.are
serial-write.are
set-ipsec-route.are
sms-con rm.are
sms-control.are
sms-delete-inbox.are
sms-read-inbox.are
sms-to-email.are
sms-to-serial.are
snmp-agent.are
snmp-cmd.are
NB3000-Line-Hd User Manual 4.2
Description
This script will write a new value to a node at a OPC-UA server.
This script will supervise a speci ed host.
This script can be used to read a con guration parameter.
This script reads and sends mails from a remote
IMAP/POP3/SMTP server
This script can be used to switch the Mobile LAI according to
available networks
This script can be used to switch the WLAN client network ac-
cording to availability
This script will send an E-Mail to the speci ed address.
This script will send an SMS to the speci ed phone number.
This script will generate a techsupport and send it to the spec-
i ed E-Mail address.
This script can be used to read messages from the serial port.
This script will write to and read from the serial port.
This script reads messages coming from the serial port and
forwards them via TCP to remote hosts (and vice versa).
This script can be used to set/get the attributes of the serial
port.
This script reads messages coming from the serial port and
forwards them via UDP to a remote host (and vice versa).
This script can be used to write a message to the serial port.
set route to IPSEC server depending on active WWAN / WLAN
network
This script will send out a message and con rm its delivery.
This script will execute commands received by SMS.
This script can be used to ush the SMS inbox.
This script can be used to read the SMS inbox.
This script will forward incoming SMS messages to a given E-
mail address.
This script can be used to write a received SMS to the serial
port.
This script extends MIB entries of the SNMP agent
This script issues SNMP set/get commands
215