NetModule NB3000-Line-Hd User Manual page 82

When running the serial port as AT modem emulator the following settings can be applied:
Parameter
Physical protocol
Baud rate
Hardware ow control
Parameter
Port
Parameter
Number
IP address
Port
NB3000-Line-Hd User Manual 4.2
Serial Port Settings
Selects the desired physical protocol on the serial port
Speci es the baud rate run on the serial port
You may enable RTS/CTS hardware ow control, so that the
RTS and CTS lines are used to control the ow of data
Incoming connections via Telnet
The TCP port for the device server
Phonebook Entries
Phone number that will get an alias
IP address the number will become
Port value for the IP address
73