Dial-In; Dial-In Server Settings - NetModule NB3000-Line-Hd User Manual

5.6.5. Dial-In

On this page you can con gure the Dial-In server in order to establish a data connection
over GSM calls. Thus, one would generally apply a required service type of 2G-only, so that
the modem registers to GSM only. Naturally, a concurrent use of outgoing WWAN interfaces
and Dial-In connection is not possible.
The following settings can be set:
Parameter
Administrative status
Modem
User
Password
Address range start
Address range size
NB3000-Line-Hd User Manual 4.2
Figure 5.36.: Dial-in Server Settings
Dial-in Server Con guration
Speci es whether incoming calls shall be answered or not
Speci es the modem on which calls can come in
Speci es the username for the incoming PPP connection
Speci es the password for the incoming PPP connection
Start of the IP address range assigned to incoming clients
Number of addresses for client IP address range
113