Dial-In; Dial-In Server Settings - NetModule NB1600 User Manual

NB1600 User Manual

5.6.4. Dial-In

On this page you can configure the Dial-In server in order to establish a data connection
over GSM calls. Thus, one would generally apply a required service type of 2G-only, so
that the modem registers to GSM only. Naturally, a concurrent use of outgoing WWAN
interfaces and Dial-In connection is not possible.
Figure 5.32.: Dial-in Server Settings
The following settings can be set:
Administrative status: Specifies whether incoming calls shall be answered or not
Modem: Specifies the modem on which calls can come in
Address range start: Start of the IP address range assigned to incoming clients
Address range size: Number of addresses for client IP address range
Besides the admin account you can configure further users in the user accounts section
which shall be allowed to dial-in.
Please note that Dial-In connections are generally discouraged. As they are implemented
as GSM voice calls, they suffer from unreliability and poor bandwidth.
73