Dial-In; Dial-In Server Settings - NetModule NB3700 User Manual

5.6.5. Dial-In

On this page you can configure the Dial-In server in order to establish a data connection
over GSM calls. Thus, one would generally apply a required service type of 2G-only, so
that the modem registers to GSM only. Naturally, a concurrent use of outgoing WWAN
interfaces and Dial-In connection is not possible.
The following settings can be set:
Parameter
Administrative status
Modem
Address range start
Address range size
Besides the admin account you can configure further users in the user accounts section
NB3700 User Manual 3.8
Figure 5.36.: Dial-in Server Settings
Dial-in Server Configuration
Specifies whether incoming calls shall be answered or not
Specifies the modem on which calls can come in
Start of the IP address range assigned to incoming clients
Number of addresses for client IP address range
95