Thermo Scientific 410i Instruction Manual page 96

Operation
Instrument Controls Menu
Date/Time
Timezone
3-60 Model 410i Instruction Manual
Note The service mode should be turned off when finished, as it prevents
remote operation.
In the Main Menu, choose Instrument Controls > Service Mode.
●
The Date/Time screen allows the user to view and change the system date
and time (24-hour format). The internal clock is powered by its own
battery when instrument power is off.
In the Main Menu, choose Instrument Controls > Date/Time.
●
DATE AND TIME:
19 MAR 2009
PRESS TO EDIT
RANGE AVG DIAGS ALARM
The Timezone screen is used to set the timezone for the Network Time
Protocol (NTP) server. This should be set to the timezone that the
instrument is located in. If the exact timezone is not shown in the list, it
may be entered via the C-LINK "tz" command (see Appendix B). The
selections are: UTC (GMT), EST (GMT+5), CST (GMT+6), MST
(GMT+7), PST (GMT+8), YST (GMT+9), HST (GMT+10), NST
(GMT+11), DLW (GMT+12), CET (GMT-1), EET (GMT-2), BST
(GMT-3), DLT (GMT-4), ECH (GMT-5), FOX (GMT-6), GLF (GMT-
7), CCT (GMT-8), JST (GMT-9), GST (GMT-10), LMA (GMT-11),
DLE (GMT-12), EDT (GMT+5/4), CDT (GMT+6/5), MDT
(GMT+7/6), and PDT (GMT+8/7).
Note The current timezone may say NULL before the timezone is set for
the first time, or if the timezone was cleared with a C-Link command.
▲
SERVICE MODE:
CURRENTLY:
SET TO:
TOGGLE VALUE
RANGE AVG DIAGS ALARM
12:34:56
OFF
ON ?
DATE AND TIME:
19 MAR 2009
SETTING: DAYS
 SET MONTHS

CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
12:34:56 ?
▲
Thermo Fisher Scientific