Calibrate O Background; Calibrate O Coefficient; Instrument Controls Menu - Thermo Scientific 410i Instruction Manual

Calibrate O
Background
Calibrate O
Coefficient
Instrument Controls
Thermo Fisher Scientific
The Calibrate O
2
perform a "zero calibration." Be sure the analyzer samples nitrogen until
the readings stabilize. The display shows the current O
In the Main Menu, choose Calibration > Calibrate O
●
The Calibrate O
2
concentration while sampling span gas of known concentration.
The display shows the current O
the display is where the O
In the Main Menu, choose Calibration > Calibrate O
●
The Instrument Controls menu contains a number of items that may be
selected to control various instrument operational parameters. The
Menu
firmware controls listed in this menu enable control of the listed
instrument functions. The O
if the internal O
In the Main Menu, choose Instrument Controls.
●
Background screen is used to adjust the background, or
2
O2 BACKGROUND:
O2:
CURRENTLY:
 SET O2 TO ZERO
RANGE AVG DIAGS ALARM
Coefficient screen is used to adjust the O
2
calibration gas concentration is entered.
2
CALIBRATE O2:
O2:
SPAN CONC:
 MOVE CURSOR
 CHANGE VALUE
RANGE AVG DIAGS ALARM
2
sensor option is installed.
2
0.12 %
0.00 % ?
concentration reading. The next line of
2
20.80 %
00020.80
 SAVE
Compensation menu item is only displayed
Model 410i Instruction Manual
Operation

Instrument Controls Menu

reading.
2
Background.
2
span
2
Coefficient.
2
3-25