Single Range Mode; Figure 3-4. Pin-Out Of Rear Panel Connector In Single Range Mode; Table 3-2. Default Analog Outputs In Single Range Mode - Thermo Scientific 410i Instruction Manual

Single Range Mode

Thermo Fisher Scientific
In the single range mode, there is one range, one averaging time, and one
span coefficient.
By default, the two CO
connector as shown in
connections. Single range mode may be selected from the
Select" on page 3-78.
Figure 3–4. Pin-Out of Rear Panel Connector in Single Range Mode
Table 3–2. Default Analog Outputs in Single Range Mode
Channel Connector Pin
1 14
2 33
3 15
4 34
5 17
6 36
Ground 16, 18, 19, 35, 37
Note All channels are user definable. If any customization has been made
to the analog output configuration, the default selections my not apply.
analog outputs are arranged on the rear panel
2
Figure 3–4. See Table 3–2
I/O Terminal Pin
1
3
5
7
9
11
2, 4, 6, 8, 10, 12
Operation
Range Menu
for channels and pin
"Range Mode
Description
CO Analog Output
2
CO Analog Output
2
None
None
None
None
Signal Ground
Model 410i Instruction Manual
▲
3-9