Main Menu; Range Menu - Thermo Scientific 410i Instruction Manual

Operation

Range Menu

Main Menu

Range Menu
3-8 Model 410i Instruction Manual
The Main Menu contains a number of submenus. Instrument parameters
and settings can be read and modified within the submenus according to
their function. The concentration appears above the main menu and
submenus in every screen. The Service menu is visible only when the
instrument is in service mode. For more information on the service mode,
see "Service
Use
●
Press
●
Press
●
screen.
The Range menu allows the operator to select the gas units, CO
and to set the custom ranges. The screens below show the range menu in
single range mode and dual/auto range modes. The only difference between
the screens are the words "HI" and "LO" to indicate which range is
displayed. For more information about the single, dual and auto range
modes, see
Mode" below.
In the Main Menu, choose Range
●
RANGE:
>GAS UNITS
RANGE
SET CUSTOM RANGES
RANGE AVG DIAGS ALARM
Mode" later in this chapter.
and to move the cursor up and down.
to select a choice.
to return to the Main Menu or
XXLO WCONCENTRATIONXXLO
CO2
xSAMPLE 12:34
MAIN MENU:
>RANGE
AVERAGING TIME
CALIBRATION FACTORS
CALIBRATION
INSTRUMENT CONTROLS
DIAGNOSTICS
ALARMS
RANGE AVG DIAGS ALARM
SERVICE
PASSWORD
"Single Range Mode",
RANGE:
ppm
>GAS UNITS
500.0
LO RANGE
HI RANGE
SET CUSTOM RANGES
RANGE
to return to the Run
W
15.80 ppm
ALARMx

"Dual Range Mode", and
AVG DIAGS ALARM
ranges,
2
"Auto Range
ppm
500.0
1000.0
Thermo Fisher Scientific