Servicing
Filter Wheel Replacement
7-14
Model 410i Instruction Manual
1. Turn the instrument OFF, unplug the power cord, and remove the
cover.
2. Remove the motor and wheel assembly by removing the three motor
plate Allen screws holding the motor plate to the optical bench
7–7
or
Figure 7–8
Motor Plate Screws (3)
Figure 7–7. Removing the Motor (Standard)
Motor Plate Screws (3)
Figure 7–8. Removing the Motor (High Level)
3. Remove the cross recessed screw on the bottom of the motor plate.
as appropriate.
Figure
Thermo Fisher Scientific