Figure 2-3. Model 410I Rear Panel; Figure 2-4. Atmospheric Dump Bypass Plumbing - Thermo Scientific 410i Instruction Manual

Installation
Setup Procedure
2-4 Model 410i Instruction Manual
"Terminal Block and Cable
For detailed information about troubleshooting a connection, refer to
"Analog Output
5. Plug the instrument into an outlet of the appropriate voltage and
frequency.
WARNING The Model 410i is supplied with a three-wire grounding cord.
Under no circumstances should this grounding system be defeated.
Figure 2–3. Model 410i Rear Panel
SAMPLE
Figure 2–4. Atmospheric Dump Bypass Plumbing
Testing" on page 7-30.
Instrument Bulkhead
Kits" on page 9-4
Vent to Exhaust Line at
Atmospheric Pressure
Input Gas Line
▲
Thermo Fisher Scientific