Number Of Items - Thermo Scientific 410i Instruction Manual

Number of Items

Select Run Screen Item
Thermo Fisher Scientific
In the Main Menu, choose Service > Setup Run Screens > select a Run
●
Screen > Enabled.
ENABLE/DISABLE RUN SCREEN:
CURRENTLY:
SET TO:
RANGE AVG
The Number of Items menu selection is used to set the number of
instrument readings to display on the custom Run screen. A maximum of
10 items can be displayed on the Run screen. A Run screen configured for
5 items or less displays the items in the large font; a Run screen with 6-10
items displays the items in the small font.
In the Main Menu, choose Service > Setup Run Screens > select a Run
●
Screen > Number of Items.
SET NUMBER OF ITEMS:
CURRENTLY:
SET TO:
 CHANGE VALUE
RANGE AVG
The Select Run Screen Item screen is used to assign a selected parameter to
a position in the Run screen display list. Choices are Concentrations,
Corrected Concentrations (if the O
Other Measurements, and Analog Inputs (if the I/O expansion board is
installed). Item 1 is displayed at the top of the list. If "None" is selected,
the associated item will not be displayed on the Run screen.
In the Main Menu, choose Service > Setup Run Screens > select a Run
●
Screen > Item 1-10.
OFF
ON ?
TOGGLE VALUE
DIAGS ALARM
5
4 ?
SAVE
DIAGS ALARM
compensation option is enabled),
2
Model 410i Instruction Manual
Operation
Service Menu
3-91