Operation
Service Menu
Coefficients
Default Coefficients
Preamp Board
Calibration
3-84
Model 410i Instruction Manual
SET CAL GAS POINT:
RANGE:
CAL FACTOR 1:
CAL GAS 1:
CHANGE VALUE
RANGE
AVG
The Coefficients screen allows the user to view and re-calculate the
calibration coefficients.
In the Main Menu, choose Service > Multipoint Cal > select Cal Point
●
> Coefficients.
COEFFICIENTS:
RANGE
AVG
The Default Coefficients screen allows the user to view and reset the
calibration coefficients to default values.
In the Main Menu, choose Service > Multipoint Cal > select Cal Point
●
> Default Coefficients.
COEFFICIENTS:
SET TO DEFAULTS ?
RANGE
AVG
The Pre-amp Board Calibration screen is used to adjust the preamp board
calibration parameters. The preamp board calibration screen is visible only
when the instrument is in service mode. For more information on the
service mode, see
"Service
Note This adjustment should only be performed by an instrument service
technician.
▲
10000
1.0000
0040.000
MOVE CURSOR
SAVE
DIAGS ALARM
1: 1.00000
2: 1.00000
3: 1.00000
RECALCULATE ?
DIAGS ALARM
1: 1.00000
2: 1.00000
3: 1.00000
DIAGS ALARM
Mode" earlier in this chapter.
?
Thermo Fisher Scientific