Communication Settings; Serial Settings - Thermo Scientific 410i Instruction Manual

Communication

Serial Settings

Thermo Fisher Scientific
The Communication Settings menu is used for communications control
and configuration.
Settings
In the Main Menu, choose Instrument Controls > Communication
●
Settings.
The Serial Setting submenu is used for serial communications control and
configuration.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings.
Baud Rate The Baud Rate screen is used to set the RS-232/RS-485 interface baud rate.
Baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
are available. The analyzer's default baud rate is set to 9600 to provide
backwards compatibility with the older C-series analyzers.
In the Main Menu, choose Instrument Controls > Communication
●
Settings > Serial Settings > Baud Rate.

COMMUNICATION SETTINGS:

>SERIAL SETTINGS
INSTRUMENT ID
GESYTEC SERIAL NO
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG
RANGE AVG DIAGS ALARM
TCP/IP SETTINGS
SERIAL SETTINGS:
>BAUD RATE
DATA BITS
PARITY
STOP BITS
RS-232/485 SEL
RANGE AVG DIAGS ALARM
Instrument Controls Menu
9600
8
NONE
1
RS-232
Model 410i Instruction Manual
Operation
3-35