Dilution Ratio; Setup Run Screens - Thermo Scientific 410i Instruction Manual

Dilution Ratio

Setup Run Screens

Thermo Fisher Scientific
O2 CORRECTION CONC:
CURRENTLY:
SET TO:

CHANGE VALUE
RANGE AVG
The Dilution Ratio screen allows the user to view and set the dilution ratio.
Acceptable values are 1–500: 1. The default is 1:1. When this value is set,
the dilution ratio is applied to all concentration measurements. This screen
is only accessible if the dilution ratio option is installed and when the
instrument is in service mode. For more information on the service mode,
see "Service Mode" earlier in the chapter.
In the Main Menu, choose Service > Dilution Ratio.
●
DILUTION RATIO:
CURRENTLY:
SET TO:
 CHANGE VALUE
RANGE AVG
The Setup Run Screens menu is used to define and edit up to five custom
Run screens. When the instrument is turned on, screen 1 (or zero) is the
default screen. The Setup Run Screens menu is visible only when the
instrument is in the Service mode. For more information on the service
mode, see "Service Mode" earlier in the chapter.
In the Main Menu, choose Service > Setup Run Screens.
●
SELECT RUN SCREEN:
>RUN SCREEN 1
RUN SCREEN 2
RUN SCREEN 3
RUN SCREEN 4
RUN SCREEN 5
RANGE AVG
START SCREEN
15.55 %
16.00 % ?

MOVE CURSOR

SAVE
DIAGS ALARM
001.00 :1
002.00 :1 ?

MOVE CURSOR
SAVE
DIAGS ALARM
DIAGS ALARM
 DEFAULT
Operation
Service Menu

Model 410i Instruction Manual 3-89