Thermo Scientific 410i Instruction Manual page 153

Safety Precautions
Troubleshooting
Thermo Fisher Scientific
Chapter 6
Troubleshooting
This instrument has been designed to achieve a high level of reliability. In
the event of problems or failure, the troubleshooting guidelines, board-level
connection diagrams, connector pin descriptions, and testing procedures
presented in this chapter should be helpful in isolating and identifying
problems.
For additional fault location information refer to the
Maintenance" chapter in this manual.
The service mode in the "Operation" chapter includes parameters and
functions that are useful when making adjustments or diagnosing
problems.
The Technical Support Department at Thermo Fisher Scientific can also
be consulted in the event of problems. See
20 for contact information. In any correspondence with the factory, please
note both the serial number and program number of the instrument.
This chapter provides the following troubleshooting and service support
information:
"Safety
●
"Troubleshooting
●
"Board-Level Connection
●
"Connector Pin
●
"Service
●
Read the safety precautions in the Preface and "Servicing" chapter before
performing any actions listed in this chapter.
The troubleshooting guides presented in this chapter are designed to help
isolate and identify instrument problems.
Guides
Table 6–1
checks that you should perform if you experience an instrument problem.
Precautions" on page 6-1
Guides" on page
Diagrams" on page
Descriptions" on page
Locations" on page 6-20
provides general troubleshooting information and indicates the
"Preventive
"Service Locations" on page
6-1
6-5
6-7
Model 410i Instruction Manual
6-
6-1