Cisco TelePresence SX10
Introduction
xStatus Video Input Source [n] Resolution RefreshRate
Shows the resolution refresh rate (Hz) for the video input source.
Value space of the result returned:
0..300
Example:
xStatus Video Input Source 1 Resolution RefreshRate
*s Video Input Source 1 Resolution RefreshRate: 50
** end
xStatus Video Input Source [n] Resolution Width
Shows the resolution width (in pixels) for the video input source.
Value space of the result returned:
0..4000
Example:
xStatus Video Input Source 1 Resolution Width
*s Video Input Source 1 Resolution Width: 1920
** end
xStatus Video Layout LayoutFamily Local
Shows the local screen layout family.
Value space of the result returned:
String
Example:
xStatus Video Layout LayoutFamily Local
*s Video Layout LayoutFamily Local: "equal"
** end
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API
xConfiguration
xCommand
xStatus Video Layout LayoutFamily Remote
Shows the remote screen layout family.
Value space of the result returned:
String
Example:
xStatus Video Layout LayoutFamily Remote
*s Video Layout LayoutFamily Remote: "equal"
** end
xStatus Video Monitors
Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Value space of the result returned:
Single/Dual/DualPresentationOnly/Triple/TriplePresentationOnly/Quadruple
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end
xStatus Video Output
Shows the top level overview of the video output status.
174
API Reference Guide
xStatus
xStatus
Appendices
Copyright © 2016 Cisco Systems, Inc. All rights reserved.