Chapter 5 Alarm; Alarm Modes; Alarm Level - EDAN M3A User Manual

Vital signs monitor
Hide thumbs Also See for M3A:
Table of Contents

Advertisement

M3A Vital Signs Monitor User Manual
Alarm

Chapter 5 Alarm

This chapter gives general information about the alarm and measures to be taken accordingly.
Alarm setup and prompt messages are provided in respective parameter setup sections.
WARNING
A potential hazard can exist if different alarm presets are used for the same or similar
equipment in any single area.

5.1 Alarm Modes

5.1.1 Alarm Level

Each alarm, either technical or physiological, has its own level. For an alarm of a higher level,
when the alarm is activated, the system will give a prompt in various ways. The alarm's level can
not be changed by the user once defined by the system. Alarms in the monitor are divided into
three levels: High, Medium and Low.
High-level alarm indicates the patient's life is in danger or the monitor has serious technical
problems. It is a most serious alarm.
Medium-level alarm means serious warning.
Low-level alarm is a general warning.
The monitor provides two types of alarm: physiological alarms and technical alarms. Also, the
monitor provides prompts. Physiological alarms refer to those alarms triggered by patient's
physiological situation which could be considered dangerous to his or her life. Technical alarms
refer to system failure which can make a certain monitoring process technically impossible or
make monitoring result unbelievable. The monitor can give the character indication of monitoring
process or other functions. And this character is called prompts.
All technical alarms and some of the physiological alarms are preset in the system and can not be
changed by the user.
5.1.2 Alarm Modes
When an alarm occurs, the monitor can raise the user's attention in at least three ways, which are
audio prompt, visual prompt and description.
Audio and visual prompts are given by LCD display device, the speaker on the display device
and the alarm indicator. Physiological alarm, technical Alarm or description is displayed in
information area or beside the parameters at the bottom of the screen.
NOTE:
The concrete presentation of each alarm prompt is related to the alarm level.
- 34 -

Advertisement

Table of Contents
loading

Table of Contents