A2.4 Recommended Separation Distances - EDAN M3A User Manual

M3A Vital Signs Monitor User Manual

A2.4 Recommended Separation Distances

portable and mobile RF communications equipment and M3A
M3A is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of M3A can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and M3A as recommended below, according to the maximum output
power of the communications equipment.
Rated maximum
output power of
transmitter
(W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Recommended separation distances between
Separation distance according to frequency of transmitter(m)
150 kHz to 80 MHz
0.12
0.38
1.2
3.8
12
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
- 100 -
EMC Information
800 MHz to 2.7 GHz
0.23
0.73
2.3
7.3
23