Table of Contents
Advertisement
M3A Vital Signs Monitor User Manual
Appendix Ⅱ EMC Information - Guidance and
Manufacture's Declaration
A2.1 Electromagnetic Emissions
Guidance and manufacture's declaration – electromagnetic emission
M3A is intended for use in the electromagnetic environment specified below. The customer or
the user of M3A should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emission
CISPR 11
Harmonic emissions
IEC/EN 61000-3-2
Voltage fluctuations/
flicker emissions
IEC/EN 61000-3-3
NOTE:
The EMISSIONS characteristics of M3A make it suitable for use in industrial areas and
hospitals (CISPR 11 class A). If it is used in a residential environment (for which CISPR
11 class B is normally required) M3A might not offer adequate protection to
radio-frequency communication services. The user might need to take mitigation
measures, such as relocating or re-orienting the equipment.
A2.2 Electromagnetic Immunity
Guidance and manufacture's declaration – electromagnetic immunity
M3A is intended for use in the electromagnetic environment specified below. The customer or
the user of M3A should assure that it is used in such an environment.
Electromagnetic environment – guidance
Compliance
M3A uses RF energy only for their internal
function. Therefore, their RF emissions are very
Group 1
low and are not likely to cause any interference
in nearby electronic equipment.
M3A is suitable for use in all establishments,
Class A
other than domestic establishments and those
directly connected to the public low-voltage
power supply network that supplies buildings
Class A
used for domestic purposes.
Complies
- 95 -
EMC Information
Advertisement
Table of Contents
