Table of Contents
Advertisement
5.
Tool Interface
5.1
Mounting Tool
The tool is to be mounted on the tool mounting flange at the end of arm 3. Fig. 5.1
shows the dimensions of the tool mounting flange.
As shown in Fig. 5.1, the tool is centered with the ø20H7 mating section. The tool
direction is adjusted by means of the ø5 knock pin and secured with four (4) M5 bolts.
ø5 H7 depth 5
TRANSPORTATION AND INSTALLATION MANUAL
4 x M5, depth 10
Fig. 5.1 Tool mounting dimensions
– 65 –
M5 bolt
Tool
STE 80745
Advertisement
Table of Contents
