•
The wire to be used should be such that can well withstand the mass of the
robot.
•
When lifting up the robot, it may tilt a little. Lift it up slowly.
•
Lifting up and down should be performed carefully so that any impact cannot
be exerted on the robot.
•
When carrying the robot by workers, take careful precautions to prevent
their hand or leg from being caught in the robot.
DO NOT hold the arms 2 and 3.
Handling areas
After the installation, remove the clamp and eyebolt used for transport.
TRANSPORTATION AND INSTALLATION MANUAL
!
CAUTION
Fig. 2.4 Robot handling areas
– 17 –
Handling areas
STE 80745