Distributed-Gateway Local; Gateway Subnet - H3C MSR 810 Command Reference Manual

Related commands
reset counters interface vsi-interface

distributed-gateway local

Use
distributed-gateway local
provide services for the local site.
Use
undo distributed-gateway local
Syntax
distributed-gateway local
undo distributed-gateway local
Default
A VSI interface is not a distributed gateway.
Views
VSI interface view
Predefined user roles
network-admin
Usage guidelines
If a VXLAN uses distributed gateway services, you must assign the same IP address to the VXLAN's
VSI interfaces on different VTEPs. To avoid IP address conflicts, you must specify the VSI interface
on each VTEP as a distributed gateway.
Examples
# Specify VSI-interface 100 as a distributed gateway.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] distributed-gateway local

gateway subnet

Use
gateway subnet
Use
undo gateway subnet
Syntax
gateway
prefix-length }
undo gateway
prefix-length }
Default
No subnet is assigned to a VSI.
Views
VSI view
Predefined user roles
network-admin
to assign a subnet to a VSI.
to remove a subnet from a VSI.
subnet { ipv4-address
subnet {
to specify a VSI interface as a distributed gateway to
to restore the default.
wildcard-mask
ipv4-address wildcard-mask
41
| ipv6-address
| ipv6-address