Table 9 Command output
Field
Interface
Link
Protocol
Primary IP
Description
Cause
Related commands
reset counters interface vsi-interface
distributed-gateway local
Use distributed-gateway local to specify a VSI interface as a distributed gateway to
provide services for the local site.
Use undo distributed-gateway local to restore the default.
Syntax
distributed-gateway local
undo distributed-gateway local
Default
A VSI interface is not a distributed gateway.
Views
VSI interface view
Predefined user roles
network-admin
Description
Abbreviated interface name.
Physical link state of the interface:
•
UP—The interface is physically up.
•
DOWN—The interface is physically down.
•
ADM—The interface has been shut down by using the
command. To restore the physical state of the interface, use the
undo shutdown
•
Stby—The interface is a backup interface in standby state. To see the
primary interface, use the
state
command.
Data link layer protocol state of the interface:
•
UP—The data link layer protocol of the interface is up.
•
UP (s)—The data link layer protocol of the interface is up, but the link
is an on-demand link or does not exist. The (s) attribute represents
the spoofing flag.
•
DOWN—The data link layer protocol of the interface is down.
Primary IP address of the interface. This field displays two hyphens (--) if
the interface does not have an IP address.
Description of the interface.
Cause for the physical link state of an interface to be DOWN:
•
Administratively—The interface has been manually shut down by
using the
shutdown
interface, use the
undo shutdown
•
Not connected—The interface is not mapped to any VSI, or the
mapped VSI does not have any AC or VXLAN tunnel.
32
command.
display interface-backup
command. To restore the physical state of the
command.
shutdown