H3C MSR 810 Command Reference Manual page 15

Field
MTU
Bandwidth
Broadcast Restrain
Multicast Restrain
Unknown Unicast
Restrain
MAC Learning
MAC Table Limit
MAC Learning Rate
Drop Unknown
PW Redundancy
Flooding
Service Class
Statistics
Input Statistics
Output Statistics
Gateway Interface
Description
•
Down—The VSI is down.
•
Administratively down—The VSI has been manually shut down by using
the shutdown command.
MTU on the VSI.
Maximum bandwidth (in kbps) for known unicast traffic on the VSI. This field
displays a hyphen (-) if it is not available in the current software version.
Broadcast restraint bandwidth (in kbps). This field displays a hyphen (-) if it is not
available in the current software version.
Multicast restraint bandwidth (in kbps). This field displays a hyphen (-) if it is not
available in the current software version.
Unknown unicast restraint bandwidth (in kbps). This field displays a hyphen (-) if it
is not available in the current software version.
State of the MAC learning feature.
Maximum number of MAC address entries on the VSI. This field displays a
hyphen (-) if it is not available in the current software version.
MAC address entry learning rate of the VSI. This field displays a hyphen (-) if it is
not available in the current software version.
Action on source MAC-unknown frames received after the maximum number of
MAC entries is reached.
•
Enabled—Drops the frames.
•
Disabled—Forwards the frames without learning the source MAC address.
PW redundancy mode:
•
Slave—Master/slave mode and the local PE operates as the slave node.
•
Master—Master/slave mode and the local PE operates as the master node.
This field is not supported by a VXLAN network.
State of the VSI's flooding feature:
•
Enabled—Flooding is enabled on the VSI. The VTEP floods unknown
unicast frames to both local and remote sites.
•
Disabled—Flooding is disabled on the VSI. The VTEP floods unknown
unicast frames only to local sites.
Service class value of outgoing VXLAN packets. This field displays a hyphen (-) if
it is not available in the current software version.
Packet statistics state:
•
Enabled—The packet statistics feature is enabled for the VSI.
•
Disabled—The packet statistics feature is disabled for the VSI.
Incoming traffic statistics:
•
Octets—Number of incoming bytes.
•
Packets—Number of incoming packets.
•
Errors—Number of error packets.
•
Discards—Number of discarded packets.
Outgoing traffic statistics:
•
Octets—Number of outgoing bytes.
•
Packets—Number of outgoing packets.
•
Errors—Number of error packets.
•
Discards—Number of discarded packets.
VSI interface name.
9