Vxlan Udp-Port; Xconnect Vsi - H3C MSR 810 Command Reference Manual

Examples
# Disable remote-MAC address learning.
<Sysname> system-view
[Sysname] vxlan tunnel mac-learning disable

vxlan udp-port

Use
vxlan udp-port
Use
undo vxlan udp-port
Syntax
vxlan udp-port port-number
undo vxlan udp-port
Default
The destination UDP port number is 4789 for VXLAN packets.
Views
System view
Predefined user roles
network-admin
Parameters
port-number
a port number in the range of 1024 to 65535 to avoid conflict with well-known ports.
Usage guidelines
You must configure the same destination UDP port number on all VTEPs in a VXLAN.
Examples
# Set the destination UDP port number to 6666 for VXLAN packets.
<Sysname> system-view
[Sysname] vxlan udp-port 6666

xconnect vsi

Use
xconnect vsi
Use
undo xconnect vsi
Syntax
xconnect vsi vsi-name [ track track-entry-number&<1-3> ]
undo xconnect vsi
Default
An AC is not mapped to any VSI.
Views
Interface view
Predefined user roles
network-admin
to set the destination UDP port number for VXLAN packets.
to restore the default.
: Specifies a UDP port number in the range of 1 to 65535. As a best practice, specify
to map an AC to a VSI.
to restore the default.
33