H3C MSR 810 Command Reference Manual page 11

: Displays detailed information about Layer 3 interfaces. If you do not specify this keyword,
verbose
the command displays brief information about Layer 3 interfaces.
Usage guidelines
If you do not specify any parameters, this command displays brief L2VPN information for all Layer 3
interfaces that are mapped to VSIs.
Examples
# Display brief L2VPN information for all Layer 3 interfaces that are mapped to VSIs.
<Sysname> display l2vpn interface
Total number of interfaces: 2, 1 up, 1 down
Interface
GE1/0/1
GE1/0/2
Table 2 Command output
Field
Interface
Owner
Link ID
State
Type
# Display detailed L2VPN information for all Layer 3 interfaces that are mapped to VSIs.
<Sysname> display l2vpn interface verbose
Interface: GE1/0/1
Owner
Link ID
State
Type
Interface: GE1/0/2
Owner
Link ID
State
Type
Table 3 Command output
Field
Interface
Owner
Link ID
State
Owner
vxlan3
vxlan4
Description
Layer 3 interface name.
VSI name.
The interface's link ID on the VSI.
Physical state of the interface:
•
Up—The interface is physically up.
•
Down—The interface is physically down.
L2VPN type of the interface. This field displays VSI for the VXLAN feature.
: vsi1
: 0
: Up
: VSI
: vsi2
: 0
: Down
: VSI
Description
Layer 3 interface name.
VSI name.
The interface's link ID on the VSI.
Physical state of the interface:
•
Up—The interface is physically up.
Link ID
1
2
5
State Type
Up VSI
Down VSI