Introduction To Loading Approaches; Local Software Loading - H3C S3610 Series Operation Manual

Hide thumbs Also See for S3610 Series:

Table of Contents

Operation Manual – System Maintenance and Debugging

H3C S3610&S5510 Series Ethernet Switches

modules, you can load/download software/files conveniently to the switch through an

Ethernet port.

This chapter introduces how to load BootROM and host software to a switch locally and

how to do this remotely.

3.2.1 Introduction to Loading Approaches

I. You can load software locally by using:

XMODEM through Console port

TFTP through Ethernet port

FTP through Ethernet port

II. You can load software remotely by using:

FTP

TFTP

Note:

The BootROM software version should be compatible with the host software version

when you load the BootROM and host software.

If your terminal is directly connected to the switch, you can load the BootROM and host

software locally.

Before loading the software, make sure that your terminal is correctly connected to the

switch to insure successful loading.

Note:

The loading process of the BootROM software is the same as that of the host software,

except that during the former process, you should press <Ctrl+U> and <Enter> after

entering the Boot Menu and the system gives different prompts. The following text

mainly describes the BootROM loading process.

I. Boot Menu

Starting......

3-2

Chapter 3 Device Management

Table of Contents

S5510 series