Selective-Flooding Mac-Address - H3C MSR 810 Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
vsi vsi-name
not specify a VSI, this command clears packet statistics on VXLAN tunnel interfaces of all VSIs.
Examples
# Clear packet statistics on VXLAN tunnel interfaces of all VSIs.
<Sysname> reset l2vpn statistics tunnel
Related commands
tunnel statistics enable

selective-flooding mac-address

Use
selective-flooding mac-address
Use
undo selective-flooding mac-address
Syntax
selective-flooding mac-address mac-address
undo selective-flooding mac-address mac-address
Default
Selective flood is disabled for all MAC addresses.
Views
VSI view
Predefined user roles
network-admin
Parameters
mac-address
Usage guidelines
This command excludes a remote MAC address from the flood suppression done by using the
flooding disable
address to remote sites when unknown-unicast floods are confined to the local site.
Examples
# Enable selective flood for 000f-e201-0101 on VSI vsi1.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] selective-flooding mac-address 000f-e201-0101
Related commands
flooding disable
: Specifies a VSI by its name, a case-sensitive string of 1 to 31 characters. If you do
: Specifies a MAC address. The MAC address cannot be all Fs.
command. The VTEP will flood the frames destined for the specified MAC
to enable selective flood for a MAC address.
to disable selective flood for a MAC address.
21