Hayward OmniLogic Troubleshooting Manual page 28

1. Wired Ethernet: "MSP Not Found"
If the OmniLogic system has not been configured, web registration will not be
successful. If not configured, load a backed-up file or complete the configuration
process before continuing.
Verify MSP is Configured Verify the Firmware is up-to-date
Step 1A
Step 1B
When configured, system dashboard will appear. When Locate the 'config' icon & go to system info. Verify the
not configured or it has been removed, the MSP rev. matches the latest found at
configuration icon will default in the center of the www.hayward.com Support Center> Automation >
screen (as shown above). IF configured, go to step 1B. IF OmniLogic > Firmware Updates (under MSP). IF not,
not, complete the configuration process & retest. follow steps on pg. 10-12. IF correct, go to step 1C.
28