Hayward OmniLogic Troubleshooting Manual page 40

2. Wi-Fi Connection: "MSP Not Found" (cont.)
LAN testers are crucial tools for testing the integrity AND proper configuration of
network cabling. They are readily available through Network Supply Stores.
Conduct LAN test on cables Inspect 24V LED on MPP
Step 2E
Step 2F
Unplug both Wi-Fi cables and conduct a LAN test on On the MPP, verify the 24V LED is illuminated. IF the
each cable, using a LAN tester. IF cable(s) fail the LAN LED is ON or you are unsure, go to step 2G. IF the LED
test, replace all failed cables. IF both cables pass, go to is clearly off, proceed to Section 3 (pg. 48) to diagnose
step 2F. system power.
40